Influence of Material Properties on the Performance of Grinding Burrs - Engineering bibliographies - in Harvard style

In-text: (Basics of Sintering, Powder Metallurgy Training Course, Vol 1, 2007)

Your Bibliography: 2007. Basics of Sintering, Powder Metallurgy Training Course, Vol 1.

In-text: (Agrawal, 1998)

Your Bibliography: Agrawal, D., 1998. Microwave processing of ceramics. Current opinion in Solid State and Materials Science, 3(5), pp.480-485.

In-text: (Becker, n.d.)

Your Bibliography: Becker, F., n.d. Debinding processes: Physical and chemical conclusions and their practical realisations. Riedhammer GmbH,.

In-text: (Bennett, McKinnon and Williams, 1968)

Your Bibliography: Bennett, C., McKinnon, N. and Williams, L., 1968. Sintering in Gas Discharges. Nature, 217(5135), pp.1287-1288.

In-text: (Breen, 2012)

Your Bibliography: Breen, A., 2012. Evaluation of microwave plasma for the processing of metallic materials. University College Dublin, p.19.

In-text: (Breen, Milosavljević and Dowling, 2011)

Your Bibliography: Breen, A., Milosavljević, V. and Dowling, D., 2011. Influence of Gas Type on the Thermal Efficiency of Microwave Plasmas for the Sintering of Metal Powders. Plasma Chem Plasma Process, 31(5), pp.771-785.

In-text: (Breval et al., 2004)

Your Bibliography: Breval, E., Cheng, J., Agrawal, D., Gigl, P., Dennis, M., Roy, R. and Papworth, A., 2004. Comparison between microwave and conventional sintering of WC/Co composites. Materials Science and Engineering: A, 391(1-2), pp.285-295.

In-text: (Brunatto, Klein and Muzart, 2008)

Your Bibliography: Brunatto, S., Klein, A. and Muzart, J., 2008. Hollow cathode discharge: application of a deposition treatment in the iron sintering. J. Braz. Soc. Mech. Sci. & Eng., 30(2), pp.145-151.

In-text: (Chawla and Chawla, 2004)

Your Bibliography: Chawla, K. and Chawla, N., 2004. Metal-Matrix Composites. Wiley Online Library.

In-text: (Cheng, Agrawal, Zhang and Roy, 2002)

Your Bibliography: Cheng, J., Agrawal, D., Zhang, Y. and Roy, R., 2002. Microwave sintering of transparent alumina. Materials Letters, 56(4), pp.587-592.

In-text: (Ciobanu, 2011)

Your Bibliography: Ciobanu, P., 2011. ABOUT MECHANICAL STRENGTH OF POROUS MATERIALS. AIP Conference Proceedings,.

In-text: (Clark and Sutton, 1966)

Your Bibliography: Clark, D. and Sutton, W., 1966. Microwave processing of materials. Annual Review of Materials Science, 79, pp.299-331.

In-text: (Danninger and Gierl, 2001)

Your Bibliography: Danninger, H. and Gierl, C., 2001. Processes in PM steel compacts during the initial stages of sintering. Materials Chemistry and Physics, 67(1-3), pp.49-55.

In-text: (Danninger, Avakemian and Ghierl, 2011)

Your Bibliography: Danninger, H., Avakemian, A. and Ghierl, C., 2011. FRACTURE MORPHOLOGY OF GREEN CRACKS IN SINTERED PM STEELS. Powder Metallurgy Progress, 11, pp.3-10.

In-text: (Datta, 2012)

Your Bibliography: Datta, B., 2012. Powder metallurgy : an advanced technique of processing engineering materials. New Delhi : PHI Learning Private Limited.

In-text: (Demirskyi, Ragulya and Agrawal, 2011)

Your Bibliography: Demirskyi, D., Ragulya, A. and Agrawal, D., 2011. Initial stage sintering of binderless tungsten carbide powder under microwave radiation. Ceramics International, 37(2), pp.505-512.

In-text: (Wholly Sintered, Silver Brazed and Laser Welded Diamond Saw Blades – Diamond Blade Select, 2010)

Your Bibliography: Diamond Blade Select. 2010. Wholly Sintered, Silver Brazed and Laser Welded Diamond Saw Blades – Diamond Blade Select. [online] Available at: <http://www.diamondbladeselect.com/knowledge/wholly-sintered-silver-brazed-and-laser-welded-diamond-saw-blades/> [Accessed 14 April 2015].

In-text: (Dugdale, 1966)

Your Bibliography: Dugdale, R., 1966. The application of the glow discharge to material processing. Journal of Materials Science, 1(2), pp.160-169.

In-text: (Ederer, 1999)

Your Bibliography: Ederer, L., 1999. THE EFFECT OF ZINC STEARATE ON THE COMPACTION AND SINTERING CHARACTERISTICS OF A Ti-6%Al-4%V HYDRIDE-DEHYDRIDE POWDER. Department of Mining and Metallurgical Engineering McGill University Montreal, Canada.

In-text: (EPMA, 2007)

Your Bibliography: EPMA, 2007. Basics of Sintering, Powder Metallurgy Training Course. EPMA.

In-text: (Exner and Gurland, 1970)

Your Bibliography: Exner, H. and Gurland, J., 1970. Powder Metallurgy. pp.13-30.

In-text: (Finnie, 1995)

Your Bibliography: Finnie, I., 1995. Some reflections on the past and future of erosion. Wear, 186-187, pp.1-10.

In-text: (Gassman, 1996)

Your Bibliography: Gassman, R., 1996. Mater. Sci. Tech. 12th ed. pp.691-696.

In-text: (German, 1984)

Your Bibliography: German, R., 1984. Powder metallurgy science. Princeton, N.J.: Metal Powder Industries Federation.

In-text: (German, 1987)

Your Bibliography: German, R., 1987. Theory of thermal debinding. Int. Journal of Powder Metallurgy, 4(23), pp.237-245.

In-text: (6.10: Sintering Furnaces On GlobalSpec, 2015)

Your Bibliography: Globalspec.com. 2015. 6.10: Sintering Furnaces On GlobalSpec. [online] Available at: <http://www.globalspec.com/reference/73406/203279/6-10-sintering-furnaces> [Accessed 19 January 2015].

In-text: (Greetham, 1990)

Your Bibliography: Greetham, G., 1990. Development and performance on infiltrated and non-infiltrated valve seat insert materials and their performance. Powder Metallurgy, 3(2), pp.112-114.

In-text: (Greetham, 1990)

Your Bibliography: Greetham, G., 1990. Development and performance on infiltrated and non-infiltrated valve seat insert materials and their performance. Powder Metallurgy, 3(2), pp.112-114.

In-text: (Hassouni, Grotjohn and Gicquel, 1999)

Your Bibliography: Hassouni, K., Grotjohn, T. and Gicquel, A., 1999. Self-consistent microwave field and plasma discharge simulations for a moderate pressure hydrogen discharge reactor. J. Appl. Phys., 86(1), p.134.

In-text: (Hayashi and Etoh, 1989)

Your Bibliography: Hayashi, K. and Etoh, H., 1989. Pressure Sintering of Iron, Cobalt, Nickel and Copper Ultrafine Powders and the Crystal Grain Size and Hardness of the Compacts. Materials Transactions, JIM, 30(11), pp.925-931.

In-text: (2015)

Your Bibliography: Hht-eu.com. 2015. [online] Available at: <http://www.hht-eu.com/hht-eu/nte/swiftED-TM%20picture.jpg> [Accessed 22 January 2015].

In-text: (Hoyle, 1998)

Your Bibliography: Hoyle, G., 1998. High speed steels. Cambridge: Butterworths.

In-text: (Hsieh and Lin, 2001)

Your Bibliography: Hsieh, Y. and Lin, S., 2001. Diamond tool bits with iron alloys as the binding matrices. Materials Chemistry and Physics, 72(2), pp.121-125.

In-text: (Inspektor, Oles and Bauer, 1997)

Your Bibliography: Inspektor, A., Oles, E. and Bauer, C., 1997. Theory and practice in diamond coated metal-cutting tools. pp.49-56.

In-text: (Johnson and Su, 1996)

Your Bibliography: Johnson, D. and Su, H., 1996. Microwave Plasma Sintering of Alumina. MRS Proc., 430.

In-text: (Kalpakjian, 1984)

Your Bibliography: Kalpakjian, S., 1984. Manufacturing processes for engineering materials. Reading, Mass.: Addison-Wesley.

In-text: (Kaplan, 1992)

Your Bibliography: Kaplan, S., 1992. Plasma processes in the plastics industry. Thirty Fifth Annual Technical Conference Society of Vacuum Coaters, pp.273-277.

In-text: (Karagoz and Zeren, 1998)

Your Bibliography: Karagoz, S. and Zeren, M., 1998. Characterisation of hot pressing behaviour of diamond cutting tools. In: Int. PM Conf. pp.4-208.

In-text: (Karagoz and Zeren, 2001)

Your Bibliography: Karagoz, S. and Zeren, M., 2001. Materials Characterization. pp.89-91.

In-text: (Kijima, 1985)

Your Bibliography: Kijima, K., 1985. Plasma sintering of ceramic materials. 7th International Symposium on Plasma Chemistry Proa, edited by CJ Timmermans, 2, pp.662-667.

In-text: (Konstanty, 2005)

Your Bibliography: Konstanty, J., 2005. Powder metallurgy diamond tools. Amsterdam: Elsevier.

In-text: (Lawcock and Wright, 2003)

Your Bibliography: Lawcock, R. and Wright, M., 2003. Advances in powder metallurgy & particulate materials, 2003). Princeton, NJ: Metal Powder Industries Federation.

In-text: (Lebedev, 2010)

Your Bibliography: Lebedev, Y., 2010. Microwave discharges: generation and diagnostics. J. Phys.: Conf. Ser., 257, p.012016.

In-text: (Lieberman and Lichtenberg, 1994)

Your Bibliography: Lieberman, M. and Lichtenberg, A., 1994. Principles of plasma discharges and materials processing. New York: Wiley.

In-text: (Lou et al., 2003)

Your Bibliography: Lou, D., Hellman, J., Luhulima, D., Liimatainen, J. and Lindroos, V., 2003. Interactions between tungsten carbide (WC) particulates and metal matrix in WC-reinforced composites. Materials Science and Engineering: A, 340(1-2), pp.155-162.

In-text: (Lourenço, Maliska, Klein and Muzart, 2004)

Your Bibliography: Lourenço, J., Maliska, A., Klein, A. and Muzart, J., 2004. Plasma sintering of unalloyed iron: a study of surface porosity. Mat. Res., 7(2), pp.269-275.

In-text: (Luk, 2000)

Your Bibliography: Luk, S., 2000. Advances in Binder-Treatment Technology. Proceedings of 2000 Powder Metallurgy World Congress, Kyoto International Conference Hall, Japan, Nov. 12-16,.

In-text: (Madej, 2010)

Your Bibliography: Madej, M., 2010. The Properties and Structure of Infiltrated High Speed Steel-Tungsten Carbide-Copper Composites. MSF, 636-637, pp.184-191.

In-text: (Index of /processes, 2015)

Your Bibliography: Manufacturing.stanford.edu. 2015. Index of /processes. [online] Available at: <http://manufacturing.stanford.edu/processes/> [Accessed 14 April 2015].

In-text: (Marchiori et al., 2007)

Your Bibliography: Marchiori, R., Maliska, A., Borges, P., Klein, A. and Muzart, J., 2007. Corrosion study of plasma sintered unalloyed iron: The influence of porosity sealing and Ni surface enrichment. Materials Science and Engineering: A, 467(1-2), pp.159-164.

In-text: (Flexure Formula | Strength of Materials Review, 2015)

Your Bibliography: Mathalino.com. 2015. Flexure Formula | Strength of Materials Review. [online] Available at: <http://www.mathalino.com/reviewer/mechanics-and-strength-of-materials/flexure-formula> [Accessed 20 April 2015].

In-text: (Menezes, Souto and Kiminami, 2007)

Your Bibliography: Menezes, R., Souto, P. and Kiminami, R., 2007. Microwave sintering of ceramics. Part i: Fundamental Aspects. Ceramica, 53(325), pp.1-10.

In-text: (Microwave sintering coming of age, 1999)

Your Bibliography: Metal Powder Report, 1999. Microwave sintering coming of age. 54(7-8), pp.24-28.

In-text: (Analysis of thermal debinding, 2001)

Your Bibliography: Metal Powder Report, 2001. Analysis of thermal debinding. 56(9), p.36.

In-text: (Mill, 1996)

Your Bibliography: Mill, B., 1996. J. Mater. Proc. Tech. pp.16-23.

In-text: (Mizuno et al., 2004)

Your Bibliography: Mizuno, M., Obata, S., Takayama, S., Ito, S., Kato, N., Hirai, T. and Sato, M., 2004. Sintering of alumina by 2.45 GHz microwave heating. Journal of the European Ceramic Society, 24(2), pp.387-391.

In-text: (Mondal, Upadhyaya and Agrawal, 2010)

Your Bibliography: Mondal, A., Upadhyaya, A. and Agrawal, D., 2010. Effect of heating mode on sintering of tungsten. International Journal of Refractory Metals and Hard Materials, 28(5), pp.597-600.

In-text: (Murakawa and Takeuchi, 1991)

Your Bibliography: Murakawa, M. and Takeuchi, S., 1991. Surface and coatings technology. pp.359-364.

In-text: (Oberg, Jones, Horton and Ryffel, 1988)

Your Bibliography: Oberg, E., Jones, F., Horton, H. and Ryffel, H., 1988. Machinery's handbook. New York: Industrial Press.

In-text: (Ohring, 2001)

Your Bibliography: Ohring, M., 2001. The materials science of thin films. ed. Academic, New York,.

In-text: (Peelamedu, Kumar and Kumar, 2006)

Your Bibliography: Peelamedu, R., Kumar, D. and Kumar, S., 2006. Microwave atmospheric pressure plasma for surface treatment and reactive coating on steel surfaces. Surface and Coatings Technology, 201(7), pp.4008-4013.

In-text: (Density - The Physics Hypertextbook, 2015)

Your Bibliography: Physics.info. 2015. Density - The Physics Hypertextbook. [online] Available at: <http://physics.info/density/> [Accessed 20 April 2015].

In-text: (Plama, 2001)

Your Bibliography: Plama, R., 2001. Tempering response of copper alloy-infiltrated T15 high-speed steel. The International Journal of Powder Metallurgy, 37(5), pp.29-35.

In-text: (2015)

Your Bibliography: Plasma.inpe.br. 2015. [online] Available at: <http://www.plasma.inpe.br/LAP_Portal/LAP_Site/Figures/ECR_Discharge.gif> [Accessed 20 January 2015].

In-text: (Poszmik and Luk, 2003)

Your Bibliography: Poszmik, G. and Luk, S., 2003. Binder Treated Products for Higher Densities and Better Precision. In: International Conference on Powder Metallurgy and Particulate Materials. Cinnaminson, NJ: Hoeganaes Corporation.

In-text: (Poszmik and Narasimhan, 2007)

Your Bibliography: Poszmik, G. and Narasimhan, K., 2007. Segregation-Free Premixes for Increased Productivity and Improved Performance. MSF, 534-536, pp.313-316.

In-text: (Ro¨diger, Dreyer, Gerdes and Willert-Porada, 1998)

Your Bibliography: Ro¨diger, K., Dreyer, K., Gerdes, T. and Willert-Porada, M., 1998. Microwave sintering of hardmetals. International Journal of Refractory Metals and Hard Materials, 16(4-6), pp.409-416.

In-text: (Roy, Agrawal, Cheng and Gedevanishvili, 1999)

Your Bibliography: Roy, R., Agrawal, D., Cheng, J. and Gedevanishvili, S., 1999. Full sintering of powdered metal bodies in a microwave field. Nature 399, pp.668-669.

In-text: (Saitou, 2006)

Your Bibliography: Saitou, K., 2006. Microwave sintering of iron, cobalt, nickel, copper and stainless steel powders. Scripta Materialia, 54(5), pp.875-879.

In-text: (Šalak, 1995)

Your Bibliography: Šalak, A., 1995. Ferrous Powder Metallurgy. Cambridge Int. Sci. Publication,.

In-text: (Schade and Marucci, 2011)

Your Bibliography: Schade, C. and Marucci, M., 2011. Improved Powder Performance Through Binder Treatment of Premixes. Proceedings of the 2011 International Conference on Powder Metallurgy & Particulate Materials,.

In-text: (Schatt and Wieters, 1997)

Your Bibliography: Schatt, W. and Wieters, K., 1997. Powder metallurgy. Shrewsbury, UK: European Powder Metallurgy Association.

In-text: (Semel and Luk, 1996)

Your Bibliography: Semel, F. and Luk, S., 1996. “Continuing Improvements in Binder Treatment Technology. PM2TEC 1996 World Congress,.

In-text: (Shao et al., 2004)

Your Bibliography: Shao, W., Ivanov, V., Zhen, L., Cui, Y. and Wang, Y., 2004. A study on graphitization of diamond in copper–diamond composite materials. Materials Letters, 58(1-2), pp.146-149.

In-text: (Sigl and Fischmeister, 1988)

Your Bibliography: Sigl, L. and Fischmeister, H., 1988. Acta Metal. 4th ed. pp.887-897.

In-text: (St-Laurent, Gelinas, Thomas and Azzi, 2005)

Your Bibliography: St-Laurent, S., Gelinas, C., Thomas, Y. and Azzi, L., 2005. “Using Binder-Treatment Technology for High Performance Steel Powder Mixes. 2005 International Conference on Powder Metallurgy & Particulate Materials, Montréal, Québec, Canada, June 19- 23,.

In-text: (2015)

Your Bibliography: Sv.vt.edu. 2015. [online] Available at: <http://www.sv.vt.edu/classes/MSE2034_NoteBook/MSE2034_kriz_NoteBook/diffusion/apps/sinter1.gif> [Accessed 23 January 2015].

In-text: (Tahir and Ariffin, 2006)

Your Bibliography: Tahir, S. and Ariffin, A., 2006. Fracture in metal powder compaction. International Journal of Solids and Structures, 43(6), pp.1528-1542.

In-text: (Abrasives Training Grinding Basics | Tooling U-SME, 2015)

Your Bibliography: Toolingu.com. 2015. Abrasives Training Grinding Basics | Tooling U-SME. [online] Available at: <http://www.toolingu.com/class-250110-what-is-grinding.html> [Accessed 14 April 2015].

In-text: (Tudov, 2008)

Your Bibliography: Tudov, I., 2008. The Designer’s Guide to Tungsten Carbide. General Carbide,.

In-text: (FAQ: What is graphitisation?, 2015)

Your Bibliography: Twi-global.com. 2015. FAQ: What is graphitisation?. [online] Available at: <http://www.twi-global.com/technical-knowledge/faqs/material-faqs/faq-what-is-graphitisation/> [Accessed 2 April 2015].

In-text: (Twomey et al., 2010)

Your Bibliography: Twomey, B., Breen, A., Byrne, G., Hynes, A. and Dowling, D., 2010. Plasma power can slash small run sintering times. Metal Powder Report, 65(2), pp.10-13.

In-text: (Twomey et al., 2011)

Your Bibliography: Twomey, B., Breen, A., Byrne, G., Hynes, A. and Dowling, D., 2011. Rapid discharge sintering of nickel–diamond metal matrix composites. Journal of Materials Processing Technology, 211(7), pp.1210-1216.

In-text: (Tynan, 2009)

Your Bibliography: Tynan, J., 2009. Application of atmospheric pressure plasma treatments for enhanced polymer adhesion. Dublin: University College Dublin.

In-text: (Wang et al., 2002)

Your Bibliography: Wang, Y., Zang, J., Wang, M., Guan, Y. and Zheng, Y., 2002. Properties and applications of Ti-coated diamond grits. Journal of Materials Processing Technology, 129(1-3), pp.369-372.

In-text: (Fundamentals of Machine Tools, 2015)

Your Bibliography: Waybuilder.net. 2015. Fundamentals of Machine Tools. [online] Available at: <http://www.waybuilder.net/free-ed/Resources/Trades/Indust/machinist01/FundamentalsOfMachineTools.asp?iNum=54> [Accessed 14 April 2015].

In-text: (Webster and Tricard, 2004)

Your Bibliography: Webster, J. and Tricard, M., 2004. Innovations in Abrasive Products for Precision Grinding. CIRP Annals - Manufacturing Technology, 53(2), pp.597-617.

In-text: (Wroe, 1999)

Your Bibliography: Wroe, R., 1999. Microwave sintering coming of age. Metal Powder Report, 54(7), p.24.

In-text: (Yan and Hu, 2006)

Your Bibliography: Yan, M. and Hu, J., 2006. Microwave sintering of high-permeability (Ni0.20Zn0.60Cu0.20)Fe1.98O4 ferrite at low sintering temperatures. Journal of Magnetism and Magnetic Materials, 305(1), pp.171-176.

In-text: (Zeren and Karagöz, 2005)

Your Bibliography: Zeren, M. and Karagöz, Ş., 2005. Sintering of polycrystalline diamond cutting tools. Materials & Design, 27, pp.1055-1058.

In-text: (Zhang and Fang, 2008)

Your Bibliography: Zhang, H. and Fang, Z., 2008. Characterization of quasi-plastic deformation of WC–Co composite using Hertzian indentation technique. International Journal of Refractory Metals and Hard Materials, 26(2), pp.106-114.